• 产品概述
  

HPF890型智能操控装置用于3～35kV户内开关柜，适用于中置柜、手车柜、固定柜、环网柜等多种开关柜。它具有一次回路模拟图及开关状态指示，高压带电显示，自动温湿度控制，人体感应自动照明，语音提示，电参数测量及RS485通讯接口等众多功能，集操作、显示于一体。

Product overview

HPF890 intelligent control device for 3 ~ 35kV indoor switch cabinet, which is suitable for middle cabinet, hand cabinet, fixed cabinet, ring network cabinet and other switch cabinets. It has a primary circuit analog diagram and switch status indication, high voltage live display, automatic temperature and humidity control, human body sensing automatic lighting, voice prompt, electrical parameter measurement and RS485 communication interface and many other functions, set operation, display in one.

• 功能简介

1）动态模拟图可以显示断路器分合闸指示，手车位置指示，接地开关位置指示和弹簧储能指示。

2）高压带电显示及闭锁适用于3.6-40.5KV/50HZ系统，与相应电压等级的传感器配合使用，显示主回路带电情况，母线各项电压均偏离额定电压较大时采取闭锁功能。

3）自动温湿度控制有温湿度模拟控制和温湿度数字控制可显示现场的温度和湿度，可根据需要自行设置加热、除湿、鼓风的上下限。

4）智能语音防误提示是在断路器和接地开关处于合闸状态时，若误操作小车位置，会有语音提示纠正操作。

5）人体感应通过感应周围红外场的变化感知有人接近，自动启动柜内照明。

6）电力参数测量包括测量主回路的电流、电压、有功功率、功率因数、电能等电力参数。

Function introduction

1) The dynamic simulation diagram can display the breaker opening and closing indication, the hand car position indication, the ground switch position indication and the spring energy storage indication.

2) High voltage live display and lock is suitable for 3.6-40.5KV/50HZ system, used in combination with the sensor of the corresponding voltage level to show the main circuit is live, and the bus voltage is larger than the rated voltage to take the lock function.

3) Automatic temperature and humidity control: temperature and humidity analog control and digital control can display the temperature and humidity of the site, and can set the upper and lower limits of heating, dehumidification and blast according to needs.

4) Intelligent voice anti-error prompt is when the circuit breaker and ground switch are in the closing state, if the wrong operation of the car position, there will be a voice prompt to correct the operation.

5) Human body sensing by sensing changes in the surrounding infrared field to sense someone approaching, automatically start the lighting in the cabinet.

6) Power parameter measurement includes measuring the current, voltage, active power, power factor, electric energy and other power parameters of the main loop.

• 技术参数

Technical parameter